Categories
Freight Loads

Best Practices For Efficient Load Safety

Although the practices followed differ a little every time with the type of commodity, location and rules pertaining to the specific sites but the general guidelines for the loading of the trucks carrying freight will be more or less the same. The safe loading of the tuck is essential to avoid any injuries to people and loss to the goods. The box truck freight that reaches the destination intact and on time is profitable to all associated with the activity.

Load restraining is the most crucial step in the loading of commodities. Load restrain helps the goods to stay in their place while the truck is moving. The best load restraint practice should be able to handle maximum force in the forward direction, followed by the force of weight sideways and rearwards. Partial weight force should be restrained vertically too.

There are few facts that should help to get the best load restraint for your trucks carrying freight:

  • Use of rope is an ineffective way to restrain loads as the tension it can bear is very less, though it may look very strongly tied.
  • It is not that the chances of loosing the goods are higher in a speeding truck; it is even more when the truck is slow.
  • Long webbed strap should be used in restraining the load, as the short chains could not be tied around well.
  • An assumption that the heavy weight load is able to restrain itself is very wrong. Both the heavy as well as light loads are likely to fall in a similar way.
  • If A load while loading is retrained well then it can withstand the same even when fully tilted and will never dislodge even in the worst of braking and swerving.
  • Load accidents are likely to happen when the journey is of city areas where the speed is low, because the restraint applied in such cases are less than for regular long distance travel. Therefore the same load restraint should be used irrespective of the journey.
  • The common assumption of checker plate deck providing more restraint than smooth plate deck is very wrong. Both are slippery the same way. The grip on the deck as well as rack can be efficiently attained by putting a strong rubber load mat underneath the load. Wood timber is effective as well.
  • Use of Conveyor belt is not as effective as rubber mat, as the conveyor belt provides slippery surface.
  • Lashings should be regularly checked during the journey as they tend to loosen up after the load settles.
  • In case the deck and the load both are slippery. Proper calculated webbing strap of required lashing capacity should be used. Inefficient lashing capacity may prove hazardous.

If proper loading techniques are followed especially the application of effective load restraint with specified performance standards it is to benefit all the parties involved; the forwarder or the consignor, the receiver or the consignee and the freight forwarding or the trucking company

Find more loads on our trucking loadboard

Categories
Freight Loads

Hotshot / Straight Truck Trailer Loads

There has been an increasing demand for hotshot drivers or 24-26ft straight truck trailers. New rules and regulations for long haul drivers have forced many owner operators to sell their larger 43-53ft Van and Reefer trailers and get a smaller trailer to cut costs.

FindFreightLoads.com Hotshot loadbard has all acquired new shippers posting hotshot deliveries in California, Nevada, Texas, Florida and soon to most of the US.